Joining Biscuits – No. 20

Zipbolt Connector UT Mini 6mmx100mm

• The fastest and easiest way of joining work/counter tops in a matter of seconds!

• The Zipbolt UT requires a simple 4mm Allen key or hex bit as a driving tool and this ensures a very positive engagement.

• The boring specification from edge to centre is 42mm – 49mm and a 12.5mm minimum depth is required

Quick Clip Connector

• The Quick Clip is a fast nail on alternative to all other methods for attaching work-tops.
• The #8 (4mm) screw hole has been angled for ease of screwing providing side clearance for drill, power screwdriver and knuckles.
• Quick clip comes with zinc-plated nails in place ready for attaching
• Utilising the #6 (3.5mm) screw hole in the direction of the nails, the Quick Clip becomes an all round component connector.
• Nail-on fitting for attaching bench tops and panels
• Additional screw facility as component connector in cabinet construction
• Angle screwing for side clearance
• Quick clip replaces cleats, figure 8’s, angle brackets, knock-in connectors and extra rails for panels
• Quantity: 100 per box, 1000 per outer box

Bench Top Connector TZ20

• TZ20 CONNECTOR FITTING WHITE • For right angled component connection • Handy for shelf installation • For mounting in pre-drilled 10mm holes for knock-in fitting
•   Quantity 500/Bag

Connector Table Top Figure 8

• A figure-8 shaped connector that can be used to join Table- tops to table frames
• Countersunk on opposing sides
• Suits M6 threaded screws
• Quantity: 100 per bag